This oscillating sander can be used hand held or can be inverted and bench mounted. Powered by a 650W high torque motor with variable speed control between 1800 and 3200rpm you can achieve super fine sanding results on curved, profiled and straight workpieces. The bobbins oscillate at a rate of 50 to 90 oscillations per minute and have a maximum sanding depth of 70mm.

The body of the sander is contoured for a positive and comfortable two handed grip and rubber non slip pads absorb vibration. It is a remarkably comfortable sander to use in the hand held mode. To bench mount the sander you simply invert the machine and insert the 2 x 'F' clamps into the body of the sander and lock the clamps on top of the bench. A rubber pad is supplied as not to indent your bench top. In bench mounted mode you have optimum control of the workpiece. For the finest finish you should connect a vacuum to the 38mm dust port.

Supplied with 4 x sanding sleeves 15mm, 20mm, 25mm and 40mm, 3 x rubber bobbins (small sleeve goes directly on the shaft), 2 x bench clamps and a rubber bench protection mat. This is a first rate sanding machine that will prove invaluable when sanding curves and profiles. ©